ViewSonic X100-4K User Manual page 76

Category Item
Email Alert
1. Enter the address of the projector in the address bar of your browser and press
Enter.
2. The main page of the Network Control will load:
NOTE: Accessing the Network Settings, Email Alert page, or Projector/LAN
Firmware update page requires the Administrator's password. The
default password is 0000.
3. This page allows you to make adjustments to the SNMP settings.
4. If your projector is connected to a network which supports Simple Mail Transfer
Protocol (SMTP), you can configure it to alert you via email on significant events.
5. The Crestron (e-Control)® page displays the Crestron e-Control user interface.
Input Length
Alert Condition Fan Error
Light Source Error
Over Temperature
Submit
Issue Test Mail
Maximum Number of
(N/A)
(N/A)
(N/A)
(N/A)
(N/A)
76
Characters