Installation; Shutting Down The Appliance; Removing The Condensate Trap - Buderus Logamax plus GB142-24 Instructions Manual

3

Installation

To install the parts of the service kit in the appliance, the following
instructions must be adhered to.
3.1

Shutting down the appliance

▶ Close the gas shut-off valve.
Fig. 2 Gas shut-off valve closed
▶ Press the control panel cover to open.
Fig. 3 Control panel cover
▶ Switch off the appliance by setting the mains switch [1] to position
"0".
110
100 120
90 130
Eco 140
0 Aut
0 1
1
Fig. 4 Mains switch to "OFF"
▶ Disconnect the electrical power to the appliance.
▶ Set the thermostat or other operating control to the lowest setting.
▶ Use the radiator key to unlock the two latches a quarter turn [1.].
▶ Open the latches [2.].
NOTICE: appliance damage due to incorrect lifting.
▶ Do not hold the casing by the latches.
Logamax plus GB142-24/30/45/60
6 720 641 697-014.1TD
6 720 641 697-003.1TD
110 130
90 150
170
190
0 Aut
Reset
6 720 641 697-12.1TD
▶ Remove the casing by lifting it upwards and then pulling it forwards
[3.].
3.
Fig. 5 Removing the casing
3.2

Removing the condensate trap

▶ Pull the condensate trap from the condensate collector [1].
▶ Loosen the condensate trap from the connection [2] and remove it.
2.
Fig. 6 Removing the condensate trap
Installation | 3
2.
1.
2.
6 720 641 697-004.1TD
1.
6 720 641 697-005.1TD
6 720 810 045 (2013/12)