3Com 5500-EI Getting Started Manual page 93

3 You will now need to reboot the fabric for the changes to take effect. The
FTP (via a network
port)
1 Enter the following command from User View:
2 To download the application file, enter:
To set the remaining switches in the fabric to load the new bootrom
firmware, replace unit1 with unit2 and so on for each switch in the
fabric.
switch will upgrade the bootrom firmware and boot from the specified
software .app file.
The files that you have saved in the backup phase should be deleted once
the upgrade has completed successfully.
To upgrade software to your switch via FTP do the following:
ftp aaa.aaa.aaa.aaa
(where aaa.aaa.aaa.aaa is the IP address of the FTP server)
If the FTP server has been successfully located, the following information
is displayed:
Trying...
Press CTRL+K to abort
Connected
Information on your FTP server is displayed, logon with your username
and password.
binary
get s4a03_01_04s56.app
The following information is displayed if the download has been
successful:
200 PORT command successful.
150 Opening ASCII mode data connection for
s4a03_01_04s56.app(3765073 bytes).......226 Transfer
complete.
FTP: 3765073byte(s) received in 376.5073 second(s)
10000.00 byte(s)/sec.
Upgrading from the Command Line Interface 93