Using Low Blue Light Mode (Select Products Only); Adjusting Blue Light Output (Select Products Only); Displayport Multistreaming Over Usb Type-C - HP QHD User Manual

Upon entering this reduced power state (Auto-Sleep Mode), the monitor screen is blanked, the backlight turns
off, and the power light turns amber. The monitor draws less than 0.5 W of power when in this reduced power
state. The monitor wakes from Auto-Sleep Mode when the computer sends an active signal to the monitor
(for example, when you activate the mouse or keyboard).
To disable Auto-Sleep Mode in the OSD:
1. Press the
2. In the OSD, select Power.
3. Select Auto-Sleep Mode, and then select Off.

Using low blue light mode (select products only)

Decreasing the blue light emitted by the monitor reduces the blue light exposure to your eyes. This monitor
uses a low blue light panel in default setting mode.
In the default setting mode, this monitor's low blue light panel is certified by TÜV to reduce blue light output
and create a more relaxing and less stimulating image while you read content on the screen.

Adjusting blue light output (select products only)

Decreasing the blue light emitted by the monitor reduces the blue light exposure to your eyes. This monitor
allows you to select a setting to reduce blue light output and create a more relaxing and less stimulating
image while you read content on the screen.
To adjust the blue light output from the monitor:
1. Press one of the OSD buttons to activate the buttons, and then press the
Select Color.
If you are using a controller, press the center of the OSD controller to open the OSD.
2. Select Low Blue Light from the setting options.
Low Blue Light: (TÜV certified) Reduces blue light for improved eye comfort.
●
Reading: Optimizes blue light and brightness for indoor viewing.
●
Night: Adjusts to the lowest blue light and reduces the impact on sleep.
●
3. Select Save and Return to save your setting and close the menu. Select Cancel if you do not want to
save the setting.
4. In the Main menu, select Exit.

DisplayPort multistreaming over USB Type-C

If you are using USB Type-C as the primary video input source, you can multistream to other DisplayPort
monitors connected in a daisy-chain configuration. You can connect up to four monitors in this configuration if
the graphics card in your computer supports this configuration.
The number of monitors you can connect through DisplayPort multistreaming depends on a number of
factors, including the resolutions and scan rates used for each monitor and the capabilities of your GPU or
embedded graphics system. If you have purchased a new graphics card for your computer, check the manual
that came with your graphics card for further information about its capabilities.
To multistream:
Menu button to open the OSD, or press the center of the OSD controller to open the OSD.
Menu
Using low blue light mode (select products only)
button to open the OSD.
21