Table of Contents
Advertisement
Using Auto-Sleep Mode (select products only)
Your monitor has an energy-saving feature called Auto-Sleep Mode, a reduced power state. This section
describes how to activate or adjust Auto-Sleep Mode on your monitor.
When Auto-Sleep Mode is enabled (enabled by default), the monitor enters a reduced power state when the
computer signals low power mode (absence of either horizontal or vertical sync signal).
Upon entering this reduced power state (Auto-Sleep mode), the monitor screen is blanked, the backlight turns
off, and the power light turns amber. The monitor draws less than 0.5 W of power when in this reduced power
state. The monitor wakes from Auto-Sleep mode when the computer sends an active signal to the monitor
(for example, when you activate the mouse or keyboard).
To disable Auto-Sleep Mode in the OSD:
1.
Press the
2.
In the OSD, select Power.
3.
Select Auto-Sleep Mode, and then select Off.
Using low blue light mode (select products only)
Decreasing the blue light emitted by the monitor reduces the blue light exposure to your eyes. This monitor
uses a low blue light panel in default setting mode.
In the default setting mode, this monitor's low blue light panel is certified by TÜV to reduce blue light output
and create a more relaxing and less stimulating image while you read content on the screen.
Adjusting blue light output (select products only)
Decreasing the blue light emitted by the monitor reduces the blue light exposure to your eyes. This monitor
allows you to select a setting to reduce blue light output and create a more relaxing and less stimulating
image while you read content on the screen.
To adjust the blue light output from the monitor:
1.
Press one of the OSD buttons to activate the buttons, and then press the
Select Color.
If you are using a controller, press the center of the OSD controller to open the OSD.
2.
Select Low Blue Light from the setting options.
Low Blue Light: (TÜV certified) Reduces blue light for improved eye comfort.
●
Reading: Optimizes blue light and brightness for indoor viewing.
●
Night: Adjusts to the lowest blue light and reduces the impact on sleep.
●
3.
Select Save and Return to save your setting and close the menu. Select Cancel if you do not want to save
the setting.
4.
In the Main menu, select Exit.
18
Chapter 2 Using the monitor
Menu
button to open the OSD, or press the center of the OSD controller to open the OSD.
Menu
button to open the OSD.
Advertisement
Table of Contents
