Sony VPL-FHZ700L Service Manual page 85

USB-RS-232C dual connection
PC
RS-232C
cross cable
Preparation
1. Set the Standby Mode to "Standard" in the Connection/Power menu.
(Refer to Operating Instructions.)
2. Set the RS-232C Setting to "RS-232C" in the Connection/Power menu.
(Refer to Operating Instructions.)
n
When updating Ext (network) of this unit, set the LAN Setting to "LAN".
When updating Ext (network) of BKM-PJ10, set the LAN Setting to "via HDBaseT".
3. Install each application to PC.
4. Disconnect the power cord of this unit.
5. Connect this unit with PC by RS-232C or USB-RS-232C dual, referring to the connection figure.
VPL-FHZ700L
RS-232C
USB cable
Remove the filter door.
(Refer to step 1 in Section 1-6-1.)
USB (mini-B)
2-15 (E)