Disassembly - Sony VPL-FHZ700L Service Manual

1-6. Disassembly

. The laser diode is used as a light source of this unit.
Never allow the light source to emit light with the cabinet removed.
Otherwise, it may cause damage to eyes or skin.
. Do not remove the lens when the set is lighting.
Otherwise, it may cause damage to eyes or skin.
. Do not release the protection circuit with the cabinet removed.
Otherwise, the light source may suddenly start emitting light, causing damage to eyes or skin.
. In order to avoid inappropriate use of the laser diode, do not disassemble the laser source unit (F).
. When performing the adjustment that requires turning the power of this unit off and on, be sure to
perform the operation with the top cover assembly attached.
n
. In this section, remove parts in the order of numbers shown in the fi gure.
. The lens for this unit is option. For usable lenses, refer to Section 3.
. When removing the lens shift unit, press the [SHIFT] or [LENS|SHIFT] button on this unit or the
remote controller, then press the [RESET] button on the remote controller to move the lens shift unit to
the specifi ed position.
V base
Lens shift unit
VPL-FHZ700L
When the lens shift unit is moved to the center position,
the screws can be removed.
1-5 (E)