About This Guide; Introduction - 3Com OfficeConnect 3CR414492 Getting Started Manual

A

Introduction

The guide describes the features, installation, and initial
configuration of the OfficeConnect
Router (OCR 812). The guide is intended for both first-time
and experienced computer network users who want to
install and use the OCR 812.
With your new OCR 812, we have provided an Installation
CD and an Installation Map.




After you have initially configured the unit, you can
implement additional configuration to optimize the unit's
performance on your network.
Refer to the OfficeConnect Remote 812 Online User's
Guide (install from your OfficeConnect Remote 812
Installation CD) for advanced configuration options and the
Online HTML Help. Click the help buttons located on the
Tools page and the context-sensitive buttons on the
Configuration page for more information.
This Getting Started Guide is available in Adobe Acrobat
Reader Portable Document Format (PDF) or HTML on the
OCR 812 World Wide Web site located at:
http://www.3com.com/ocr812/
T
BOUT HIS
If you are using Windows, put the Installation CD in
your CD-ROM drive and follow the steps given on the
screens using your foldout Map.
If your operating system is Macintosh or Unix-based,
you can begin by following the steps on the Map to set
up the hardware and then copying (or referencing) files
on the CD at Step 4. In Step 5, Configure the OCR 812,
you follow the instructions given for the type of Boot
Mode you have configured. There are small differences
in the procedure.
G
UIDE
®
Remote 812 ADSL