3Com OfficeConnect 3CP4144 Get Started Manual page 55

Keating Technologies
25 Royal Crest Court, Suite 200
Markham, ONT L3R 9X4
INTERNATIONAL
DECLARATION OF
CONFORMITY
Electromagnetic Compatibility
This equipment was tested and found to conform to the Council Directive 89/336/EEC for
electromagnetic compatibility. Conformity with this Directive is based upon compliance with the
following harmonized standards:
EN55022:1994 A1:1995 A2:1997(CISPR 22, 1993) Limits and Methods of Measurements of Radio
Interference. This equipment conforms to the Class B limits.
AS/NZS3548 Australian/New Zealand Limits and Methods of Measurement of Information Technology
equipment. This equipment conforms to the Class B limits.
EN 50082-1: 1992 Electromagnetic Compatibility Generic Immunity Standard: Residential, Commercial
and Light-Industrial Environment (January 1992) With IEC 801-2(1984); IEC 801-3 (1984); IEC801-4
(1988).
Safety (Low Voltage Directive)
This equipment was tested and found to conform to the Council Directive 72/23/EEC for safety of
electrical equipment. Conformity with this Directive is based upon compliance with the following
harmonized standard:
IEC 950 (1991) Second Edition with Amdts. No. 1(1992), 2(1993), 3(1995) and 4(1996) Safety of
Information Technology Equipment Including Electrical Business Equipment; EMKO-TSE (74-SEC)
207/98; EN60950 (1992) with Amdts. 1,2,3 and 4, and with National Differences as specified in the
Test Report.
TS001 and AS/NZS3260 Australian/ New Zealand standard for Safety of Information technology
equipment Including Electrical Business Equipment.
Special Notes:
_______________________________________________________________________________________
Japan