Audio Control Features; Audio Control Setting - Kenwood KDC-6090R Instruction Manual

Audio control features

KDC-6090R/KDC-5090R
Selecting mode
KDC-V6090R
Selecting mode
AUD
Adjust various parameters of sound quality.
FM AM
4 ¢
Setting value
Setting value
— 13 —

Audio Control Setting

1
Hold down the AUD button for one second or more to enter
the control mode.
2
Selecting mode
Press either the FM or AM button.
Each time the button is pressed, the adjustment mode will
change.
Please refer to the following for the contents of the
adjustment modes.
NOTE
Source tone memory
Each source (CD, FM, AM, and disc changer) has its own
memory in which to store the bass, middle, treble and N-F level
settings. (N-F level : KDC-6090R only)
The settings made for a particular source are then recalled
automatically whenever you use that source (e.g., FM mode
uses the tone settings made for FM, AM for AM, etc.).
3
Adjust each mode
Press the 4/¢ button.
Look at the table to adjust the mode being displayed.
4
Press the AUD button to end the control mode.
NOTE
Determining the parameters in the audio control setting will clear
all the adjustments made in the System Q and they are replaced
with the values made in the audio control setting.