Table of Contents
Advertisement
The messages shown below display your
systems condition.
TOC ERR:
The CD is quite dirty. The CD is upside-
down. The CD is scratched a lot.
➪ Clean the CD and load it correctly.
E-05:
The CD is upside-down.
➪ Load the CD correctly.
E-99:
The unit is malfunctioning for some reason.
➪ Press the reset button on the unit. If the
"E-99" code does not disappear, consult
your nearest service center.
READING:
The unit is reading the data on the disc.
IN (Blink):
The CD player section is not operating
properly.
➪ Reinsert the CD. If the CD cannot be
ejected or the display continues to flash
even when the CD has been properly
reinserted, please switch off the power
and consult your nearest service center.
PROTECT:
The speaker wire has a short-circuit or
touches the chassis of the vehicle, and
then the protection function is activated.
➪ Wire or insulate the speaker cable
properly and press the reset button.
NA FILE:
An Audio file is played with a format that
this unit can't support.
➪ ----
COPY PRO:
A copy-protected file is played.
➪ ----
DEMO MODE: The Demonstration mode has been
selected.
➪ The <Demonstration mode Setting>
(page 25) is ON. Turn it OFF.
33
|
English
Hide quick links:
Advertisement
Table of Contents
