Other Features; Audio Control Setting; Table Of Audio Control Setting - Kenwood KDC-PS9060R Instruction Manual

Other features

(See page 8)

Audio Control Setting

Adjust various parameters of sound quality.
1
Press the AUD button to enter the control mode.
2
Press either the FM or AM button.
Each time the button is pressed, the adjustment mode will
change as follows:
Pressing the FM button advances the display, and pressing the
AM button reverses it.
Bass High-pass filter (rear)
Treble High-pass filter (front)
Balance N-F Level (only when being switched)
Fader
(KDC-PS9060R only)
NOTE
Source tone memory
Each source (CD, FM, AM, and disc changer) has its own
memory in which to store the bass and treble tone settings.
The settings made for a particular source are then recalled
automatically whenever you use that source (e.g., FM mode uses
the tone settings made for FM, AM for AM, etc.).
3
Press the 4/¢ button.
Look at the table to adjust the mode being displayed.
4
Press the AUD button to end the control mode.
NOTE
Setting the high-pass filter
You can separately set the high-pass filter for front and rear
output, including preouts. The high-pass filter works except
during non- fading preout when switching to non-fading.
The factory default settings for front output and rear output are
"through".
(KDC-PS9060R only)

Table of Audio Control Setting

Adjustment
mode
4 button
(Display)
Bass
Bass decreased.
("BAS")
Treble
Treble decreased.
("TRE")
Balance Left channel
("BAL") emphasized.
Fader Rear channel
("FAD") increased.
Non-Fading
The front and rear
Preout Level
sound is emphasized.
("NF")
You can select the frequency to be cut, as
High-pass
filter for front follows:
THROU (through)
output
100Hz
("HPF F")
You can select the frequency to be cut, as
High-pass
filter for rear follows:
THROU (through)
output
("HPF R") 100Hz
— 28 —
Operation of Audio control button
¢ button
Bass increased.
Treble increased.
Right channel
emphasized.
Front channel
increased.
The non-fading sound is
emphasized.
40Hz 60Hz
120Hz 150Hz 180Hz
40Hz 60Hz
120Hz 150Hz 180Hz
KDC-PS9060R only
80Hz
220Hz
80Hz
220Hz