General Features; Power; Volume; Attenuator - Kenwood KDC-B7021 Instruction Manual

General features

u / d
ATT / LOUD
Clock indicator
SRC AM FM ANG
4 / ¢
DISP CLK Q / AUD
ATT indicator

Speaker Setting

SYSTEM Q indicator
indicator

Power

Turning ON the Power
Turn the vehicle ignition ON.
The faceplate reverses and control panel is displayed.
Turning OFF the Power
Turn the vehicle ignition OFF.
When the set time for removing the faceplate (page 24) lapses,
the faceplate reverses and the control panel is hidden.
Do not apply force to the faceplate during operation. It can cause
damage.
The first time the unit is used it is necessary to cancel the
Demonstration mode with the Mask key (page 22). If the
Demonstration mode isn't canceled, the unit can't be used normally.

Volume

Increasing Volume
Press the [u] button.
Decreasing Volume
Press the [d] button.

Attenuator

Turning the volume down quickly.
Press the [ATT] button.
Each time the button is pressed the Attenuator turns ON or OFF.
When it's ON, the "ATT" indicator blinks.
— 7 —