Breville Precision Brewer BDC455 Instruction Book page 21

PROBLEM
Unit does not use the
full amount of water
in the water tank
Unit brewing slow
Uneven coffee bed
Pourover adaptor is
lifted out of position
when brewing
A small amount of
water remains in the
tank after brewing
POSSIBLE CAUSE
•
There is a blockage in the system.
•
There is a blockage in the system.
•
Showerhead may not be attached/
secured properly.
•
pourover mode not selected.
•
This is part of the normal operation.
WHAT TO DO
•
Empty the tank, remove any blockage,
and wipe, inspect and clean any
obstruction and coffee/fibre/dirt build
up from the mesh filter at the bottom
of the water tank.
•
Cool down and run FAST cycle
with 1L.
•
Descale the unit.
•
Call Breville Consumer Support if
problem persists.
•
Empty the tank, remove any blockage,
and wipe, inspect and clean any
obstruction and coffee/fibre/dirt build
up from the mesh filter at the bottom
of the water tank.
•
Cool down and run FAST cycle
with 1L.
•
Descale the unit.
•
Call Breville Consumer Support if
problem persists.
•
Check the attachment of the
showerhead locking ring and shower
head.
•
Clean showerhead from any blockage
or scale buildup.
•
Go to mybrew mode and select 'on'
to engage pourover mode.
•
No user action required, continue
normal use.
21