Table of Contents
Advertisement
OWNER'S MANUAL
MODEL DH1-1010 SERIES – HEATED HOLDING UNIT
" 2":
This group setting allows any two adjacent timer channels to be paired. The user
can then keep track of the oldest product in a case where two pans hold the
same product. See pairing parameter ("Par") below for more setting details.
4. "Par" In the case where grouping ("grP") is set to "2" for channel pairing, this parameter is
used to define any pairing between two channels. Note that both paired channels need
to be setup properly for unit to operate correctly. First select channel using timer button
then choose between "no", "uP", "rt", "dn" or "LF". Not all options are available for some
units.
5. Product Name: The user can assign a product name to each channel. This will display the
6. "Prd" This parameter defines which channel(s) will have the product name feature activated.
First select channel to be edited the choose between "yes" to display product name or
"no" to display holding time. Note that the user can press the down arrow button
during normal operational to display remaining holding time of any active timer
channels.
7. "ALt" Drop time (expressed as a percentage of the holding time)
8. "CnC" Timer cancel mode
" 1":
" 2":
"HLd": Press and hold of channel button
9. "toP" Top heater temperature set point (in degree Fahrenheit or Celsius)
10. "bot" Bottom heater temperature set point (in degree Fahrenheit or Celsius)
11. "PHt" Preheat time (in minutes)
12. "bPS" Preheat bypass temperature differential (in degree Fahrenheit or Celsius).
DAILY MAINTENANCE
1. Turn off the unit and allow it to cool for 20 minutes.
2. Pans and/or pan covers should be removed, washed in mild multi-purpose detergent, rinsed and
sanitized.
3. Clean unit and base with a damp cloth/rag and a mild cleaner.
DO NOT USE A GREEN SCOTCH BRITE PAD OR ANY OTHER ABRASIVE CLEANING PAD.
THE BLUE SCOTCH BRITE (NO SCRATCH) IS SAFE TO USE.
DO NOT USE CAUSTIC CLEANING SOLUTIONS SUCH AS OVEN CLEANER. USE ONLY
MILD, NON-ABRASIVE CLEANER.
DO NOT IMMERSE IN WATER!
4. Allow sufficient drying time before attempting to use.
MONTHLY MAINTENANCE
1. Follow the daily schedule; there are no adjustments.
2.
Inspect condition of cord/plug. If damaged, have it replaced.
174830 RV120817
Copyright © 2017 Marshall Air Systems, Inc.
All Rights Reserved.
LED light bars first until timer is expired or cancelled. The LED light bars of the
next channel in line will then turn green and so on.
product name instead of the holding time during operation is activated (see
next parameter). Select channel to be edited first, then use up/down arrow
buttons to change selected character. Subsequent presses of the same timer
button will cycle through the characters.
Single press of channel button
Double press of channel button
4
Advertisement
Table of Contents
