Disassembling The Drum Unit - Brother TN-210 Series Remanufacturing Instructions

DISASSEMBLING THE DRUM UNIT

Note: For instruction purposes, the DR-210CL-K unit
is shown.
STEP 5.2
Tab
Slide the green corona cleaning tab to the unlock position to
release the corona as shown in Figure 5.2A. Lift the corona
assembly and remove it from the drum unit (Figure 5.2B).
STEP 5.3
C-clip
Tab
On the contact side of the drum unit, locate the white drum axle
locking c-clip. Using a small slotted screwdriver, remove the
c-clip as shown in Figure 5.3.
Visit Static Control on the web @ www.scc-inc.com
®
STEP 5.1
Remove the two screws securing the corona assembly on the
drum unit (Figure 5.1).
FIGURE 5.2A
Small Slotted
Screwdriver
FIGURE 5.3
Screws
Corona Assembly
Note: A metal e-clip can be used to secure the drum
axle and is removed similarly (see page 4).
SSS 1127
™
FIGURE 5.1
FIGURE 5.2B
1127 | 14
SSS
™