Toshiba D-R420KU Owner's Manual page 86

Playback (cont'd)
3
Disc Menu Language (Default : English)
Set the language for disc menu.
Use [K / L] to select a language, then press [ENTER].
Disc Menu Language
English
French
Spanish
Other
Your setting will be activated.
4
Audio Language (Default : Original)
Set the audio language.
Use [K / L] to select a language, then press [ENTER].
Audio Language
Original
English
French
Spanish
Other
Your setting will be activated.
• When "Original" is selected, the audio language will be
in the disc's default language.
5
Subtitle Language (Default : OFF)
Set the subtitle language.
Use [K / L] to select a language, then press [ENTER].
Subtitle Language
OFF
English
French
Spanish
Other
Your setting will be activated.
If "Other" is selected for
using [the Number buttons].
-
• When you finish entering the code, press [ENTER].
Refer to the language code table on page 98.
Note
• Only the languages supported by the disc can be
selected.
• Audio language setting may not be available to
some discs.
• You can also change or switch off the subtitles on a
DVD from the disc menu if it is available.
• Press [CLEAR] to erase numbers entered incorrectly.
86 86 EN EN
E7PCAUD_DR420KU_EN.indd 86 E7PCAUD_DR420KU_EN.indd 86
GENERAL SETTING
3 to 5 , press 4-digit code
Code Input
- - -
6
Angle Icon (Default : ON)
Set to "ON" to show the angle icon during the playback.
Use [K / L] to select a setting, then press [ENTER].
Angle Icon
ON
OFF
Your setting will be activated.
7
Still Mode (Default : Auto)
Select "Auto" usually.
Use [K / L] to select a setting, then press [ENTER].
Still Mode
Auto
Field
Frame
Your setting will be activated.
Auto : Optimum resolution setting ("Field" or
"Frame") will be selected.
Field : Images in the still mode will be stabilized.
Frame : Images in the still mode will be highly defined.
Note
• Frame is one completed video image made up of two
fields (There are 30 frames per second of NTSC video).
2/6/2009 10:56:01 AM 2/6/2009 10:56:01 AM