11.1
Raising the motorcycle with rear lifting gear
Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
11.2
Taking the motorcycle off of the rear wheel stand
Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
–
Secure the motorcycle against falling over.
–
Remove the rear wheel stand and lean the vehicle on the side stand.
11.3
Raising the motorcycle with a lift stand
Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
–
Insert the adapter in the rear of the lifting gear and screw into
the link fork on both sides.
Retaining adapter (69329955010)
Rear wheel work stand (69329955000)
–
Position the motorcycle vertically, align the lifting gear, and
raise the motorcycle.
700142-01
–
Use the motor guard underneath the motor to raise the vehicle.
Neither wheel is in contact with the ground.
–
Secure the motorcycle against falling over.
401942-01
SERVICE WORK ON THE CHASSIS 11
47