11 Service Work On The Chassis; Raising The Motorcycle With A Lift Stand; Removing The Motorcycle From The Lift Stand; Bleeding The Fork Legs - KTM F6001T8 2020 Owner's Manual

11 SERVICE WORK ON THE CHASSIS

11.1
Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
11.2
Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
11.3
44

Raising the motorcycle with a lift stand

401942-01

Removing the motorcycle from the lift stand

402001-10

Bleeding the fork legs

H02311-10
–
Raise the motorcycle at the frame underneath the engine.
Lift stand (78929955100)
Neither wheel is in contact with the ground.
–
Secure the motorcycle against falling over.
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, insert plug-in stand
side of the wheel spindle.
Info
Remove the plug-in stand before riding.
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
1
Release bleeder screws
Any excess pressure escapes from the interior of the fork.
–
Tighten the bleeder screws.
Finishing work
–
Remove the motorcycle from the lift stand. (
1
into the left
p. 44)
.
p. 44)