Connecting To A Tv - Toshiba HD-A1 Owner's Manual

2
2
Connections
Chapter
Connect the player to your TV to view disc contents.
To view 480 , 720 , 1080 pictures, use the HDMI
OUTPUT jack or the COMPONENT OUTPUT jacks to
connect to a TV. ( page 21, "Connecting to a
device with an HDMI input",
to a TV with component video inputs"). Some discs
may require use of the HDMI OUTPUT for viewing of
high resolution material.
See page 21.
Caution
Do not power this player using any power cord other
than the one supplied with this player.
Do not use the supplied power cord with any device
other than this player.
Switching output signals and setting the resolution
Turn on the player (
1 1
Press
Player display window
Notes
When you connect the player to your TV, be sure to turn off the power and unplug both units from the wall outlet
before making any connections.
Connect the player directly to your TV. If you connect the player to a VCR, TV/VCR combination, video selector or AV
amplifi er, the playback picture may be distorted due to copy protection.
20

Connecting to a TV

page 22, "Connecting
If the TV has an S-video input,
connect the player with an
S-video cable. When using an
S-video cable, do not connect
the yellow video cable.
Audio cable (supplied)
White
Red
page 28) before you confi gure the following setting.
(remote control).
Make sure the HDMI
indicator TURNS OFF.
HDMI
VIDEO INPUT
INPUT INPUT
VIDEO
White
INPUT
L
(FROM ANTENNA)
AUDIO
R
Red
Video cable
(supplied)
Yellow
Connect the power cord finally
to a 120V AC wall outlet.
2 2
Press repeatedly (remote
control).
Set the resolution to output from the player in
accordance with the scanning method (480 ) of
the connected TV.
Select "480 " on the player display window.
INPUT
VIDEO VIDEO
L L
AUDIO AUDIO
R R
Yellow
S-video cable
(not supplied)