Language; Audio Language - Toshiba HD-A1 Owner's Manual

6
6
Others
Chapter
Customizing the function settings (Continued)
Audio
Speaker Setting
To select various parameters for the analog 5.1 channel output.
5.1ch
When a 5.1 channel surround system is connected to this
player.
Go to the next step (see below) for detailed selections.
2ch
When a 2 channel stereo system is connected to this player.
When you selected "5.1ch":
Set the speaker sizes, distance to each speaker and the
crossover frequency.
1 Select a speaker by pressing
press OK button.
2 Select the size by pressing
button.
Front Left / Front Right
Small: Select if the speaker cannot output low
frequency.
Large: Select if the speaker can output low
frequency.
Center / L Surround / R Surround
Small: Select if the speaker cannot output low
frequency.
Large: Select if the speaker can output low
frequency.
None: When the speaker is not connected.
Subwoofer
Use: When a subwoofer is connected.
Don't Use: When a subwoofer is not connected.
Crossover Setting
Low frequency under which you set here will be of a
subwoofer. Select one from 80 Hz/100 Hz/120 Hz.
Ft
Select a distance to each speaker from the listening
position.
3 Select "Next" by pressing
OK button.
The next screen appears.
4 Select "Automatic Test Tone" by pressing
buttons, and press OK button.
A test signal is sent to each speaker. Adjust each of the
volumes by pressing
so that each speaker can sound at the same volume. For
further adjustment, check the channel balance on the
amplifi er.
5 When complete, select "OK" and press OK button.
54
/ / / buttons, and
/ buttons, and press OK
/ / / buttons, and press
/ / /
/ , selecting speakers by

Language

Disc Menu Language
To select a preferred language for disc menus.
English
To display disc menus in English.
French
To display disc menus in French.
Japanese
To display disc menus in Japanese.
Others
To make a further language choice.
After pressing OK button, follow steps 1) – 4) below.
1) Obtain the language code of the preferred language
from the Language code list (
2) Select the fi rst character by pressing
3) Press /
by pressing
4) Select "OK" and press OK button.
Note
Some discs may be played in a different language from that
you selected. A prior language may be programmed by the
disc.
Subtitle Language
To select a preferred language for subtitles.
None
To disable subtitles.
English
To display subtitles in English.
French
To display subtitles in French.
Japanese
To display subtitles in Japanese.
Others
To make a further language choice.
After pressing OK button, follow steps 1) – 4) below.
1) Obtain the language code of the preferred language
from the Language code list (
/ ,
2) Select the fi rst character by pressing
3) Press /
by pressing
4) Select "OK" and press OK button.
page 58).
/
buttons to shift. Select the second character
/ buttons.
page 58).
/
buttons to shift. Select the second character
/ buttons.
buttons.
buttons.