Marantz SR5004 Manual page 42

Zone A Setup: Pages 36-37
Zone B Setup: Pages 36-37
DC Trigger Setup: Page 37
Optical Output: Page 36
Standby mode: Page 36
Audio: Page 36
HDMI Audio: Page 36
HDMI Lip Sync: Page 36
As discussed in the Connecting your SR5004 section, the SR5004 offers two extra
zones for separately-controlled audio playback. These two zones (Zone A and Zone B)
are controlled in the Preference menu, and each has a sub-menu for that control.
Zone A is the more flexible of the two zones, so the Zone A Setup sub-menu is the
more extensive of the two sub-menus. The desired source can be selected in this menu,
and if Zone A is turned on the sleep timer may be set in this menu. Additionally, the pre-
amp output and speaker output can be configured here. If the pre-amp output is
connected, set "Zone Pre Out" to "On". If the speaker output is connected, verify that the
The Outlaws' Guide to the Marantz SR5004
Preference Menu
Zone A Setup
Marantz SR5004 42
_