Acoustic Eq - Marantz SR5004 Manual

The Outlaws' Guide to the Marantz SR5004
Zone." Once Trigger is set to something other than "Disable," the inputs below can all
be adjusted. Each input can be set to either "On" or "Off" – these settings will determine
what state the trigger is in when each input is active. Users who are turning an amp on
with the trigger will want to set each input to "On".
The DC Trigger sub-menu includes all but one of the SR5004's inputs. The input that is
omitted is Aux (the front panel input). Users who plan to pair the SR5004 with a
separate power amplifier and trigger that amplifier on are advised to check if they will be
using this input. If the Aux input will be used (either with a front panel connection or with
a device connected using HDMI or component video and coaxial or optical digital
audio), we recommend using the switched 120V output in place of the 12VDC trigger
output. An AC adapter with a DC output that is matched with your amplifier's trigger
input can be plugged into the switched 120V output and used as a trigger signal. See
your amplifier's manual for details on the appropriate AC adapter.

Acoustic EQ

The Audyssey MultEQ automatic setup process calculated speaker distances, levels,
and crossovers, but it also calculated EQ adjustments required to correct for room
effects. The Acoustic EQ menu provides controls for the Audyssey EQ curves and a
user-adjusted EQ. These adjustments will be discussed in the Roadmap to the Setup
Menus, starting on page 44.
Acoustic EQ Menu
If an Audyssey EQ curve is engaged, both Audyssey Dynamic EQ and Audyssey
Dynamic Volume can be selected. Those options will also be discussed in the Roadmap
to the Setup Menus.
Marantz SR5004 26
_