Pride Mobility KOLJA ELITE Owner's Manual page 18

B AT T E RY C H A R G I N G A N D C A R E
■ Cleaning the battery
 If the batteries are contaminated by water, battery acid, dust or other substances, they
will discharge quickly. The batteries supplied with the WU'S scooter are sealed and as
such are maintenance free with no risk of battery leakage. Please follow the steps
below to clean the battery.
1. Turn the scooter power switch to "OFF".
2. Remove the seat and dust cover.
3. Remove the shroud and unplug the terminal of the taillight and signal lights.
4. Use a clean cloth to wipe off the soiled area.
5. Take out the battery.
6. Clean the battery with a clean cloth. If the terminal is covered by white powder, please
wipe it clean using warm water.
 Warning
1. The wiring system and charger are well situated in battery pack while assembled in
plant.
2. Do not attempt to re-locate the wiring system by yourself. The improper layout of
wiring system may result in the wires pinched by battery box, which might the
electronic system failure.
3. Be sure the battery wires are connected to their right battery terminal.
 Suggestions
1. Make sure the terminals are installed properly and put the cover back on.
2. Do not use the battery to charge telecom equipment or other items.
3. Battery efficiency will vary with outside conditions; the driving distances will be
shorter in the winter. If the vehicle is not used for a long time, please charge the
battery at least every week.
4. Replace both batteries together.
5. If necessary, ask for help from your dealer for advice about maintaining and
replacing the battery.
■ USB and Storage Box
 The USB charging stand is only used for
charging mobile devices. It does not have
any function of connecting with a
computer. It is convenient for the portable
devices to provide power immediately to
avoid running out of electricity. There is
also a storage box for mobile devices and
portable items.
16