Connecting A Dvd Player/Satellite Receiver And A Vcr - Toshiba 30HF66 Owner's Manual

Connecting a DVD player/satellite receiver
and a VCR
This connection allows you to watch DVD/satellite, VCR, or TV
programs. You can record from the satellite receiver and TV, as well as
record one TV channel while watching another channel.
From satellite
DVD player / Satellite Receiver
Satellite IN
OUT to TV
S-VIDEO
Stereo VCR
IN from ANT
CH 3
CH 4
Back panel of TV
3W70721A_En_p07-14 9
VIDEO AUDIO
L R
OUT
IN
OUT to TV
OUT
L R
VIDEO AUDIO
You will need:
• three coaxial cables
• two sets of standard A/V cables
• one S-video cable
Note:
You can use a standard video cable instead
of the S-video cable, but the picture quality
will decrease. If you use an S-video cable
between the TV and DVD player/satellite
receiver, make the audio connections but
remove the standard video cable. Do not
connect both an S-video and a standard
video cable to VIDEO-1 (or VIDEO-2 or
VIDEO-3) at the same time or the picture
performance will be unacceptable.
The unauthorized recording, use, distri-
bution or revision of television programs,
videotapes, DVDs, and other materials is
prohibited under the Copyright Laws of
the United States and other countries,
and may subject you to civil and criminal
liability.
9
20/3/06, 9:32 AM