Advertisement
HL 3002
1.2
The alignement procedure
The sensor is aligned using the sensor alignment kit AK 3002 together
with HL 3000. The aligning procedure is as follows:
Receiver side
1. Start by aligning the transmitter side. This is done by removing the
receiver at the quick connect interface and instead mount HL 3000
which defines the optical axis of the sensor pair. While the receiver is
dismounted - check that the lens is clean on the receiver and that the
purging is working.
Receiver side
HL 3000 generates a considerable amount of heat. Protective gloves should be ised
when it is handled.
2
LDS 3000
Operators manual
Halogen alignement lamp
Note!
Advertisement
