D-Link Nuclias Connect DAP-3666 Quick Installation Manual page 6

app from the App Store or Google Play
by searching for Nuclias Connect or by
scanning the QR code below.
2. Open the Nuclias Connect app and
follow the onscreen instructions to
discover and set up your device.
Manual Configuration
If you are not using Nuclias Connect,
you may manually configure the DAP-
3666 using its web user interface (UI).
Refer to the DAP-3666 User Manual for
detailed configuration instructions. Use
the following methods to access the web
user interface:
Note: The management computer must
be in the same subnet as the DAP-3666.
1. Use an Ethernet cable to connect the
management computer to the PoE switch
or to the PoE Injector the DAP-3666 is
connected to.
2. Open a web browser on the management
computer and type in dap3666.local in
the address field and press Enter.
3. When prompted, enter the default login
credentials:
User name: admin
Password: admin
dlink.com/support
TECHNICAL SUPPORT
6
D-Link DAP-3666 Quick Install Guide