Adjusting The Sound; Muting The Sound; Selecting Stereo/Sap Broadcasts - Toshiba 14AF46 Owner's Manual

Adjusting the sound

Muting the sound

Press MUTE to temporarily turn off the sound. While the sound is off,
the screen will display the word MUTE in the lower right-hand corner.
To restore the sound, press MUTE again.

Selecting stereo/SAP broadcasts

You can listen to high-fidelity stereo sound with the Multi-channel TV
Sound (MTS) feature. MTS can also transmit a second audio program
(SAP) containing a second language or other audio information.
When the TV receives a stereo or SAP broadcast, the word STEREO
or SAP appears on-screen every time the TV is turned on, the channel
is changed, or the RECALL button is pressed.
The MTS feature is not available in the VIDEO mode.
You can leave your TV in STEREO mode because it will automatically
output stereo or monaural sound, depending on the broadcast type. If
the stereo sound is noisy, select MONO to reduce the noise. The word
STEREO or SAP is displayed in light blue when the TV receives the
signal.
To select the desired MTS setting:
Repeatedly press the MTS button to select either STEREO, SAP,
MONO+SAP, or MONO. If the current program is not available in stereo
or SAP, the setting will not be available when you press the MTS
button.
If the current program is not broadcasting either stereo or SAP, those
settings will not be available when you press the MTS button.
J3S10321A(E)_P26-BACK
STEREO
MONO
MONO + SAP
26
SAP
26
21/12/05, 12:35 PM
Recall
Mute
MTS