Writing Patch Settings Into A Stompbox; Saving A Patch - Boss GT-1000CORE Owner's Manual

Editing: Effects

Writing Patch Settings into a STOMPBOX

1.
Press the [EFFECT] button.
2.
Use the [SELECT] knob to choose the effect you're going to
save.
3. Use the PAGE [ K ] [ J ] buttons to move to the last page.
4.
Press the [5] knob.
The STOMPBOX select window appears.
5.
Press the [4] (WRITE TO STOMPBOX) knob.
6.
Turn knob [1] to select the writing-destination STOMPBOX.
7.
Use knobs [3]–[5] and [SELECT] knob to name the
STOMPBOX.
You can turn the [SELECT] knob to move the cursor within the
name.
Reference
For details on naming the STOMPBOX, refer to "Editing a
name" (p. 8).
8

Saving a Patch

When you want to save a patch you have created, save it as a
user patch by following the procedure below. If you do not save
the patch, the edited settings will be lost when you turn off the
power or switch to another patch.
1.
Press the [WRITE] button.
2.
Press knob [1] to select "WRITE" (PATCH WRITE).
3.
Use knob [1] to select the save-destination (U001–U250).
You can use knobs [3]–[5] and [SELECT] knob to edit the name.
Editing a name
To edit the patch name, use knob [SELECT] to move the cursor
and use knob [5] to change the character.
Controller
Turn the [3] knob
Press the [3] knob
Turn the [4] knob
Press the [4] knob
Turn the [5] knob
Turn the [SELECT] knob
4.
Press the [WRITE] button once again.
The patch is written.
Operation
Selects the type of characters
Delete one character (delete)
Switch uppercase/lowercase
Insert one space (insert)
Changes the character
Moves the cursor