Connecting With An External Midi Device; Operations From The Gt-1000Core; Operations From An External Midi Device - Boss GT-1000CORE Owner's Manual

Connecting with an External MIDI Device

On the GT-1000CORE, you can use MIDI to perform the following
operations.

Operations from the GT-1000CORE

Operation Explanation
When you select a patch on the GT-1000CORE, the
program change message specified by PATCH MIDI
Transmit program
is also transmitted. The external MIDI device that
change messages
receives this program change message will switch
to the corresponding settings.
Operations of GT-1000CORE's builtin footswitches,
or footswitches or expression pedals connected
Transmit control to the CTL 2, 3/EXP1, and CTL 4, 5/EXP2 jacks, are
change messages transmitted as control change messages. These
messages can control parameters on an external
MIDI device.

Operations from an External MIDI Device

Operation Explanation
When the GT-1000CORE receives a program
Switch patch
change message from an external MIDI device, the
numbers
GT-1000CORE will change patches.
The GT-1000CORE can receive control change
Receive control
messages to control a specified parameter while
change messages
you perform.
The GT-1000CORE can receive data that is
Receive data transmitted from another GT-1000CORE unit, or
data that was saved on a MIDI sequencer.
Connection example
GT-1000CORE
OUT
IN OUT
* Use a TRS/MIDI connecting cable (sold separately: BMIDI-5-35) to
connect an external MIDI device.
Settings
Choose [MENU] 0 "MIDI" 0 "MIDI SETTING."
1.
2.
Use [1]–[6] knobs to specify the value of each parameter.
For details on MIDI, refer to "GT-1000CORE Parameter Guide)"
(PDF).
12
External MIDI device
IN