Toshiba 15LV505-T Owner's Manual page 27

TV operation
TV operation
Basic operations
Information display
Press DISPLAY to display the current settings information
on the screen.
DISPLAY
This info display will be on-screen for a few seconds
after which the TV/DVD will automatically return to
normal TV operation.
When the TV/DVD
receives a digital signal,
the digital information will
appear.
• Channel number
• Channel label (if preset)
• V-Chip rating
• Sleep timer
• Program guide
• Resolution
When the TV/DVD
receives a analog signal,
the analog information
will appear.
• Channel number • Channel label (if preset)
• V-Chip rating • Signal type
• Sleep timer • Audio information (Stereo, SAP
• Picture size or Mono)
• Resolution
Last channel display
Press CH RTN to display the last channel selected prior
to the current channel. Press CH RTN again to go back to
the channel you were watching.
CH RTN
SKIP
27
(continued)
(continued)
• Station name
• Broadcast program name
• Signal type
• Audio language
• Picture size
Sleep function
Press SLEEP to set the TV/DVD to turn off after a preset
amount of time.
SLEEP
The clock will count up 10 minutes for each press of the
SLEEP button (Off, 0h 10m, 0h 20m,..., 2h 0m). After
the sleep setting is programmed, the display will appear
briefly every ten minutes to remind you that the sleep
timer is enabled.
To confirm the sleep timer setting, press SLEEP and the
remaining time will be displayed for a few seconds. To
cancel the sleep timer, press SLEEP repeatedly until the
display turns to Off.
Headphone
Insert a stereo headphone (not supplied) with a 1/8-inch
(3.5 mm) mini plug into the HEADPHONE jack on the rear
panel.
Note: Connecting a headphone to the TV/DVD will mute
the sound from the built-in speakers.
SLEEP
DISPLAY
VOL +/-
MUTE
CH RTN