Learning About The Remote Control - Toshiba 50HX70 Owner's Manual

Learning about the remote control

The buttons for operating the TV set only are described below.
turns the TV on or off
POWER
sets the TV to turn off at a specific time (page 45)
SLEEP
The initial press of the LIGHT button causes two actions:
LIGHT
1) enables the illumination mode
2) illuminates the keypad.
Subsequent presses of the LIGHT button cause the Illumination
mode to toggle between enabled and disabled. Any keypress
illuminates the keypad for 5 seconds.
If in programming mode, the keypad will remain lit for 10
seconds.
When disabled, pressing the LIGHT button enables the
illumination mode and lights the keypad.
Channel Numbers (0-9, 100)
cycles through the 6 device modes (TV, CABLE/SAT, VCR,
MODE
DVD, AUDIO1, AUDIO2). The mode indicator will be turned
off if the remote control has been left idle for more than 10
seconds.
allows access to Multi-Window function (page 33)
FAVORITE
allows access to Multi-Window function (page 33)
INFO
allows access to programming (page 23)
MENU
sets programming menu information (page 23)
ENTER
selects or adjusts programming menus (page 23)
yz x •
selects your favorite channels (page 28)
(FAV) x •
adjusts the volume level
VOL yz
exits programming menus (page 23)
EXIT
cycles through programmed channels (page 26)
CH yz
returns to the last viewed channel (page 28)
CH RTN
displays on-screen information(page 50)
RECALL
mutes the sound (page 46)
MUTE
selects video input source (page 42)
INPUT
allow access to PIP functions (page 31)
PIP Buttons
turns the PIP on or off
PIP
selects the PIP channels
PIP CH yz
allows access to Multi-Window function
MULTI
freezes the PIP
STILL
selects the PIP source
SOURCE
moves the PIP
LOCATE
switches the PIP and main pictures
SWAP
22
allow direct access to channels (page 26)