Connecting A Dvd/Satellite Receiver And A Vcr - Toshiba 50HX70 Owner's Manual

Connecting a DVD/satellite receiver and a VCR

This connection allows you to watch DVD/satellite, video, and TV
programs, and record one TV channel while watching another
channel.
You will need:
• one coaxial cable
• two pairs of audio cables (one single and one pair of audio cables
for a mono VCR)
• one video cable (between the TV and VCR)
• one S-video cable* (between the TV and DVD/satellite receiver)
Stereo VCR
From Antenna
IN from ANT
CH 3
CH 4
TV
From Satellite
Dish
IN from ANT
DVD/Satellite Receiver
VIDEO
OUT to TV
AUDIO CENTER
CHANNEL IN
ON OFF
OUT
S-VIDEO VAR
R L
AUDIO
VIDEO
VIDEO
Y Y
L/
L/ L MONO L
P P
B B
MONO
AUDIO AUDIO
P P
R R
R
R R R
COLOR COLOR
VIDEO-1 VIDEO-2 STREAM AUDIO AUDIO STREAM
HD 1 HD 2
IN IN OUT IN
AUDIO
OUT
L
R
S-VIDEO VIDEO
OUT OUT
Note:
*
You can use a regular video cable instead of
AUDIO
an S-video cable between the TV and DVD/
L R
IN satellite receiver, but the picture quality will
decrease.
OUT
Do not connect both an S-video cable and a
regular video cable between the TV and
DVD/satellite receiver at the same time.
Doing so will distort the picture.
ANT( 75 )
Do not connect the DVD/satellite receiver
ANT-1
and VCR to the same video channel on
OUT the TV. (See the illustration at left, which
shows the DVD/satellite receiver connected
ANT-2 to Video-1 and the VCR connected to
Video-2.)
Caution:
The unauthorized recording of television
programs, videotapes, and other materials
may infringe upon the provisions of copyright
laws.
7