Brother P-touch Pro PT-H111 User Manual page 2

3
Tape Cutter Lever
Cutter Edge
Tape Guides
End of Tape
Insert the Tape Cassette following the
drawing marked inside the case. Gently
press the Tape Cassette into the P-touch Pro
label maker until it locks into place.
• Make sure your Tape Cassette is marked
• Use Brother TZe tapes with this machine.
• Use only tape widths of 0.13" (3.5 mm), 0.23"
(6 mm), 0.35" (9 mm), or 0.47" (12 mm).
• Remove any protective plastic from the Tape
Cassette before inserting it.
LCD
1. Size
2. Cursor
3. Shift
4. Caps
NOTE
• The LCD displays one row of 15 characters; however, you can enter up to 80 characters in length.
• Label length displayed on the LCD may differ slightly from the actual label length when printed.
Tape Exit Slot
Toothed Wheel
.
1
2
3
4
5. Cable Wrap
6. Cable Flag
7. Faceplate
4
Close the Cassette Cover and gently press
until it locks into place.
NOTE
If you prefer to use the optional AC Adapter
(AD-24) instead of using batteries:
Insert the Power Adapter cord into the AC
1.
Adapter Jack on the side of the P-touch
Pro label maker.
Insert the Power Adapter into an AC
2.
electrical outlet.
8. Label Length
If you have selected a specific
label length,
Strap
AC Adapter Jack
5
6
7
8
appears.