Casio EX-P600 Service Manual & Parts List page 25

Removing the main PCB
13. Remove three lead wires and one screw.
Lead wire (green)
Lead wire (white)
14. Remove two screws and one connector, and then the main PCB.
* Precautions during assembly
• Be careful not to forget to fix the jack cover.
• Put the metal bracket into the groove of the
jack cover (Figure D).
15. Unsolder 13 positions to remove the SD card holder.
10 positions
Lead wire (yellow)
Jack cover
(Figure D)
SD card holder
— 23 —
Main PCB