Casio EX-P600 Service Manual & Parts List page 24

Removing the lens unit
10. Remove two connectors and one screw, and then the lens unit.
Removing the LCD unit
11. Remove the LCD unit from the frame using such tools as a pry bar. (Refer to the positions below where
double-sided tape is attached to remove the LCD unit.)
12. Remove three lead wires and the connector, and then the LCD unit.
* Precautions during assembly
• Let the FPC through the groove of the frame (Figure C).
• Fix the connector tightly to avoid display malfunction.
(Figure C)
Lead wire (white)
Lead wire (black)
Lead wire (green)
— 22 —
Connector
Double-sided tape