Chapter 5: Setting Up Your Tv; Initial Setup; Selecting The Menu Language; Configuring The Antenna Input Source For The Ant/Cable Terminal - Toshiba 19C100U Owner's Manual

Initial Setup

When you first turn on or reset the TV, the Initial
Setup window will appear.
1無
In the Menu Language field, press t or u to
select your preferred language.
2無
Press t or u to select Time Zone and set your
desired time zone with t or u and press
3無
Next, the Location setting window will appear.For
normal home use, press t or u to select Home
and press .
4無
Next, ANT/CABLE In setup window will appear.
Press t or u to select the input source (Cable or
Antenna) for the ANT/CABLE input on the TV.
5無
If you select Antenna, the Channel Tuning Mode
setup window will appear. To tune only digital
channels, select Digital. To tune digital channels
preferentially over analog when entering channel
number directly, select Auto. For normal tuning,
select Standard. Press
Tuning.
6無
to select Start Scan and continue with
Press
the Auto Tuning.
You can stop the Initial Setup with
you do not finish the entire Initial Setup process, the
Initial Setup window will appear every time you turn
on the TV.

Selecting the menu language

You can choose from three different languages
(English, French and Spanish) for the on-screen
display of menus and messages.
To select the menu language:
1無
and open the Preferences menu,
Press
highlight Menu Language.
2無
Press t or u to select your preferred menu
language.
3無
to close the Preferences menu.
Press
24

Chapter 5: Setting up your TV

.
to continue to Auto
. However if
Configuring the antenna input
source for the ANT/CABLE terminal
To configure the ANT/CABLE input source:
1無
and open the Setup menu.
Press
2無
Highlight Installation and press
3無
(A new set of Installation menu icons will appear,
as shown below.) Open the Terrestrial menu,
highlight Input Configuration, and press
4無
Highlight ANT/CABLE In and press t or u to
select the input source (Cable or Antenna) for the
ANT/CABLE input on the TV.
5無
To save your new settings, highlight Done and press
. To revert to your original settings, highlight
Cancel and press
.
Programming channels into the
TV's channel memory
When you press or
or TV control panel, your TV will stop only on the
channels you programmed into the TV's channel
memory.
Follow the steps below to program channels into the
TV's channel memory.

Programming channels automatically

Your TV can automatically detect all active channels
in your area and store them in its memory. After the
channels are programmed automatically, you can
manually add or erase individual channels in the
channel memory.
.
.
on the remote control
(continued)