Table of Contents
Advertisement
Startup Application
Before switching on the TV make sure that your
aerial is connected and any decoder / media
recorder, if applicable is connected and in
standby.
Quick Setup
a
1
Press the
button. Toshiba logo will appear. and
after that, The Menu Language screen will appear.
This screen will appear the first time that the
television is switched on and each time Reset TV is
selected.
b
B b C c
Press
to select the menu language and
press OK.
c
Highlight Country and press
television is now set to tune the stations for your
country.
Quick Setup
Country
Primary Subtitle Language
Secondary Subtitle Language
Primary Audio Language
Secondary Audio Language
NOTE:
• The following display menus will differ slightly
according to the country you selected.
• If there is not a country that you want to select in the
list, select Others.
d
Press OK, and the Location screen will appear.
Location
To use the TV for displaying in a store showroom,
please select [Store]. [Home] mode is
recommended for normal use.
e
C
c
Press
or
to select Home or Store. For normal
home use, select Home.
f
Press OK, and the AutoView screen will appear, press
C
c
or
to select Yes or No.
AutoView
AutoView mode automatically adjusts picture
settings to suit ambient light conditions. Do you
wish to enable AutoView mode?
g
Press OK, and the Network Setup screen will appear.
C
c
Press
or
to select Yes or No.
Network Setup
In order to enjoy online video, music, games, news and more
provided by Toshiba Places* (Toshiba's portal to internet
services) an active internet connection is required.
*Availability is dependant on country selection.
Do you want to setup network connection?
C
c
or
to select. The
UK
English
German
English
English
Home
No
Yes
• When you select No, skip to step 16.
h
Press OK, and the Network Type screen will appear.
C
c
Press
or
to select Wireless.
Connection Type
Select a connection method.
• When you select Wired (LAN cable connection),
skip to step 13.
i
Press OK, and the Wireless Setup screen will appear.
C
c
Press
or
to select the Wireless Setup type.
There are 3 methods for Wireless Setup:
• Easy Setup (WPS) - If the AP supports WPS, this
method can be used. WPS is an industry standard
designed to make connection of wireless LAN
equipment and security setup easy. WPS will
automatically configure all wireless settings.
NOTE: WEP encryption may not be able to
configured by easy setup.
• Assisted Setup - follow step 11.
Input the Security Key only.
• Manual Setup, skip to step 12.
Input the all settings.
Wireless Setup
Select the wireless connection method.
NOTE: EXIT is available during settings.
j
In step 9, when you select Easy Setup;
Press OK, and the Easy Setup screen will appear.
C
c
Press
or
to select PBC (Push Button
Configuration) or PIN (Personal Identification
Number).
b
Press
to highlight Start Scan and press OK.
PBC - Following the on-screen instructions, push the
appropriate button on your AP. When a window
reporting that the setup is complete appears, press
OK.
PIN - When the PIN code window appears, enter the
displayed PIN into your AP, and then press Next to
continue the PIN Setup. When a message displays to
report that the setup is complete, press OK.
To cancel searching for the AP:
Press BACK while searching for the AP. A message will appear,
C
c
and then press
or
15
SETTING UP YOUR TV
Wired
Easy Setup
to select Yes and press OK.
Advertisement
Table of Contents
