Mazda 3 Sedan 2020 Owner's Manual page 551

▼ Low Fuel Warning Beep
When the low fuel warning light
flashes, a warning beep is activated
once at the same time.
▼ Brake Override Warning Beep
A warning beep is activated when the
accelerator pedal and brake pedal are
depressed at the same time while
driving. Only depress the brake pedal.
▼ Shift Position Warning Beep
A sound is activated when the push
button start is pressed while the
selector lever is in a position other
than P, and the ignition is switched to
ACC. Check the selector lever
position.
▼ Electric Parking Brake (EPB)
Warning Beep
The warning buzzer is activated under
the following conditions:
The vehicle is driven with the parking

brake applied.
The Electric Parking Brake (EPB)

switch is pulled while the vehicle is
driven.
You attempt to start driving the

vehicle while the conditions for
releasing the Electric Parking Brake
(EPB) automatically have not been
met.
Warning/Indicator Lights and Warning Sounds
▼ AUTOHOLD Warning Beep
Warning light flashes/message is
displayed and beep sound is activated
simultaneously for about 5 seconds
when using AUTOHOLD function or
when AUTOHOLD switch is operated.
Because a problem with AUTOHOLD
function has occurred, AUTOHOLD
function does not operate even if
AUTOHOLD switch is operated.
If the warning light flashes/message is
displayed and the beep sound is
activated simultaneously, have your
vehicle inspected at an Authorized
Mazda Dealer.
▼ Vehicle Problem Warning Beep
If any of the following problems occur,
a warning beep is activated. Check the
information regarding the warning
indication in the instrument cluster or
on the center display.
Automatic transmission problem

Increase in automatic transmission

internal temperature
Brake fluid amount decrease

Engine oil level sensor problem

Electric Parking Brake (EPB) problem

Engine hydraulic pressure decrease

Engine coolant temperature increase

Engine system problem

If Trouble Arises
7-45