Bypassing Protection Zones - ADT Safewatch Pro 2000 User Manual

BYPASSING PROTECTION ZONES

T
Using the
unprotected. The system must be disarmed first.
6 BYPASS Key
1. Enter your security code and press the BYPASS [6] key.
L I M I T A T I O N
2. Enter the zone number(s) for the zone(s) to be bypassed (e.g., 06, 10, 13, etc.).
The system will not allow
fire zones to be by-
3. When finished, the touchpad will momentarily display a "Bypass" message for each
passed.
All bypasses are removed
when an OFF sequence
4. Arm the system as usual.
(security code plus OFF)
Bypassed zones are unprotected and will not cause an alarm if violated
is performed.
while your system is armed.
TO BYPASS ZONES:
•
Enter code.
•
Press BYPASS key.
•
Enter zone Nos.
•
Wait for bypassed zones
to be displayed.
•
Arm system as usual.
To display bypassed zones prior to arming (see displays above, right), enter your security code and press the
BYPASS [6] key. This will also bypass any open zones at that time (if "Quick Bypass" is enabled – see following page).
his key is used when you want to arm your system with one or more zones intentionally
Single digit zone numbers must be preceded by a zero (e.g. 05, 06) .
bypassed zone number. Wait for these zones to be displayed, to confirm their
bypass.
TYPICAL MOMENTARY DISPLAYS
OF BYPASSED ZONE(S)
BYPASS 06
BE DROOM WINDOW
CUSTOM DISPLAY TOUCHPAD
06
BYPASS
ENGLISH DISPLAY TOUCHPAD
– 18 –
TYPICAL DISPLAYS AFTER ALL BYPASSED
ZONES HAVE BEEN DISPLAYED (PRIOR TO ARMING)
DISARMED BYPASS
RE ADY TO ARM
CUSTOM DISPLAY TOUCHPAD
THE "READY"
AC
INDICATOR WILL
LIGHT TO SIGNIFY
THAT THE
SYSTEM IS
READY TO ARM
ENGLISH DISPLAY TOUCHPAD
AC
BYPASS