Arming Perimeter Only (Stay) - ADT Safewatch Pro 2000 User Manual

Adt user guide firealarm savs20adt-1
Hide thumbs Also See for Safewatch Pro 2000:
Table of Contents

Advertisement

ARMING PERIMETER ONLY
Using the
3
STAY Key
BEFORE ARMING,
close all doors and windows
(see CHECKING FOR OPEN
ZONES ).
THE STAY MODE ARMS
THE PERIMETER, BUT
ALLOWS USE OF THE
ENTRY/EXIT DOOR.
PERSONS WITHIN THE
PREMISES CAN MOVE
ABOUT FREELY.
† Ask your installer if this
feature is programmed in
your system. If so, place a
check in this box.
Use this key when staying inside, but expect someone to use an entry/exit door later. It is
also useful if you are leaving but someone is staying inside (or if you have pets which are
moving throughout the premises.
1. Enter your security code and press the STAY [3] key. In some systems, pressing
the "B" key on on the touchpad for 2 seconds will arm the system STAY (no code is
required). The "B" key may or may not have been programmed for this. Check with
your installer.
2. The touchpad beeps three times and displays the armed STAY message (see
displays below). The red ARMED indicator also lights. Note that there is an exit delay
in effect before arming actually takes place. See the note below.
3. After arming, an alarm sounds immediately if a protected perimeter window or non-
entry/exit door is opened, but you may otherwise move freely within the premises.
Anyone entering later can enter through an entry/exit door without causing an alarm, but
they must disarm the system within the entry delay period to avoid sounding an alarm.
Exit Delay Restart. If you wish to open the entry/exit door to let someone in after
arming STAY, you can re-start the exit delay at any time – simply press the [ ] key,
then let that person in. This avoids having to disarm the system and then re-arm it again.
N o t e : When you first arm in the STAY mode, "You may exit now" will be displayed on a Custom
Display Touchpad during the programmed exit delay. This delay is in effect even when
arming STAY. When "You may exit now " disappears, the system is fully armed.
TYPICAL DISPLAYS – "ARMED STAY"
AC
S T A Y
ENGLISH DISPLAY TOUCHPAD
– 14 –
(With Entry Delay ON)
ARME D
STAY
***
***
YOU M AY E XIT NOW
CUSTOM DISPLAY TOUCHPAD

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Savs20adt-1Savs20adtg

Table of Contents