System Setup - Kenwood DNR1007XR Instruction Manual

Setup
[Parking Assist Display]
■
When the iDatalink (commercially available)
is connected, you can display information
about obstacles around the car.
[ON]: Always displays information.
[Dyn.] (Default): Displays information when
the sensor detects obstacles.
[OFF]: Cancels this function.
This can be set when the iDatalink
(commercially available) is connected.
[Parking Assist Position]
■
Select where to display information about
obstacles on the screen (left or right).
"Left"/"Right" (Default)
This can be set when the iDatalink
(commercially available) is connected.
[Driving Position]
■
Select the driving position (left or right).
"Left" (Default)/"Right"

System Setup

You can setup system parameters.
1
Press the [HOME]/[ ] button.
2
Touch [ ].
3
Touch [SETUP].
h SETUP Menu screen appears.
h
4
Touch [System].
h System setting menu appears.
h
5
Set each parameter as follows.
■ [DEMO]
Select the demonstration mode. Default is
"ON".
[Software Information]
■
Confirm the software version of this unit.
(P.73)
72
[Open Source Licenses]
■
Display the open source licenses.
■ [Initialize]
Touch [Initialize] and then touch [Yes] to set
all the settings to the initial default settings.
• Audio SETUP Memory is not initialized.
[OEM SETUP]
■
Confirm the information about or change the
settings for using the iDatalink (commercially
available).
[Language Select Mode]
■
Switch the mode to select a language.
[Easy] (Default): Selects a language easily.
[Advanced]: Allows you to select languages
for respective items.*
[Language Select]
■
Select a language.
[Time Format]
■
■ [Clock]
[Time Zone]
■
[Clock Adjust]
■
You can set the date and time. See
Calendar/clock settings (P.9).
* If you select [Advanced] for Language
Select Mode, the following screen
appears.
[GUI Language Select]
■
Select the display language used for the
control screen and so forth.
[Navigation Language Select]
■
Select the language used for navigation.