IBM MM75 Manual page 14

USMM75Bk.book : Emm75bod.fm Page 9 Friday, September 12, 1997 7:30 PM
To display the OSD, press button 1 or
2. When the menu is displayed on the
screen, you can then select a control
using buttons 1 or 2. When the
required control is highlighted, use
buttons 3 and 4 to adjust the control.
The audio symbols shown are
dependent on your system
hardware setup. Refer to the Audio
Support section on page 12 for
details.
Control Adjust (-)
Contrast
Brightness
Balance More sound from
the left speaker
Decreases high
Treble frequency
response
Decreases low
Bass frequency
response
More sound from
Fade the monitor
speakers
Horizontal
Size
Horizontal
Position
Vertical size
Adjust (+)
More sound from
the right speaker
Increases high
frequency
response
Increases low
frequency
response
More sound from
the separate rear
speakers
9