Sending A Scenario - Epson EMP-7850 Operation Manual

Creating and Sending a Scenario
It is possible to add the desired files and slides to the Scenarios
window using drag and drop.
TIP
See Help for the functions of each of the menus in EMP SlideMaker2.
•
Use "Save" or "Save As" to save your scenario when you are still working
•
on it. However if you save the scenario to a memory card you will not be
able to play it back with EasyMP CardPlayer. Use "Send Scenario" when
saving to a memory card.

Sending a Scenario

To project a created scenario using the projector, it is necessary to send the
scenario to the memory card using "Send Scenario" in EMP SlideMaker2.
Designate a memory card inserted into the card drive of the computer as
the send destination.
It is also possible to set automatic projection and continuous projection of
a scenario at projector startup. The automatic projection function is called
"autorun".
TIP
When "Send Scenario" is performed, the scenario file is saved in the
•
memory card under the name "scenario name.sit". In addition, a folder
with the same name as the scenario is created and each screen is converted
to graphics files and saved according to the image quality settings.
If you use "Send Scenario" without saving, a folder with the same name as
•
the scenario name and a "scenario name.sit" file are created in the
scenario folder. Each screen is converted to graphics files and saved in the
created folder according to the image quality settings.
EasyMP Operation Guide
8