Setting, Monitoring And Controlling From A Computer; Changing Settings Using A Web Browser (Easyweb); Displaying Easyweb - Epson EMP-7850 Operation Manual

Setting, Monitoring and Controlling from a Computer

When a computer and the projector are connected via a network, the following
projector setting changes and administration are possible from the computer.
• Setting network functions and controlling the projector using a Web
browser. (EasyWeb)
• Monitoring and controlling the projector using EMP Monitor. (During
access point mode or Wired LAN connection mode connection).
• Obtaining projector status and network settings, controlling the
projector, and messaging errors using
manager program (During access point mode or Wired LAN
connection mode connection).
Here we will explain the above three methods.

Changing Settings Using a Web Browser (EasyWeb)

You can setup and control the projector using the Web browser of a
computer that is connected to the projector via a network. Setup and
control operations can be performed remotely if this function is used.
Use Microsoft Internet Explorer 5.0 or later as the Web browser.
TIP
Setup and control are possible using a Web browser if "Standby Mode" is set
to"Network ON" in the "Advanced1" menu of the projector's configuration
menu, even if the projector is in standby mode (when the power is off).
SNMPg and the SNMP
f Displaying EasyWeb
Display EasyWeb by either of the following procedures.
TIP
If the Web browser you are using is set up to connect via a proxy server, the
EasyWeb cannot be displayed. Please set the browser so it does not use a
proxy server, if you wish to view this page.
Using the Network Screen Tools
PROCEDURE
1 Connects a computer to the projector via a network.
s"Connecting Using Easy Connect Mode " and
"Connecting in Access Point Mode or Wired LAN
Connect Mode" in the EasyMP Setup Guide
EasyMP Operation Guide
29