54
Getting Started
Hard Drive Recovery Utilities (for the U100 model only)
5
Turn the computer over and restart it.
Checking total memory
When you add or remove a memory module, you can check
that the computer has recognized the change. To do this:
Click Start, Control Panel, Performance and
Maintenance, and then System. The General tab view
automatically appears and shows total memory.
If the computer does not recognize the memory
configuration, turn off the computer, remove the memory slot
cover, and make sure the memory module is seated properly
as described in step 11 of
page
48.
Hard Drive Recovery Utilities
(for the U100 model only)
Your computer has been configured with a hard disk partition
to allow you to recover your hard disk drive or reinstall
selected applications and software features or utilities.
NOTE
TECHNICAL NOTE: You must have at least one memory
module installed for the computer to work.
It is strongly recommended that you create recovery CDs/
DVDs before using your system. For more information on
creating Recovery media see
on page 55.
An optional writable external optical media drive that is
compatible to the computer is required to create Recovery
Discs. Visit
accessories.toshiba.com
"Adding memory"
"Creating Recovery CDs/DVDs"
for more information.
starting on