Checking Total Memory - Toshiba Satellite A200 Series User Manual

56
Getting Started
Adding memory (optional)
3 Gently lift the memory module to a 30-degree angle and slide it
out of the slot.
Front of computer
(Sample Illustration) Removing the memory module
4 Replace the memory module slot cover and secure it using the
screw.
5 Re-insert the main battery. For more information on inserting
the main battery, see
6 Turn the computer right side up.
7 Reconnect the cables.
8 Restart the computer.

Checking total memory

When you add or remove a memory module, you can check that the
computer has recognized the change. To do this:
1 Click Start, Control Panel, and then System.
The System window appears.
2 The total memory is displayed below the System heading
under Memory (RAM).
If the computer does not recognize the memory configuration, turn
off the computer and remove the memory module slot cover
(complete steps
and then check that the module is inserted completely into the
socket and lined up squarely with the socket latches.
TECHNICAL NOTE: You must have at least one memory module
installed for the computer to work.
1-8 in "Installing a memory module" on page
"Inserting a charged battery" on page
Slot A
Slot B
107.
49),