Connecting To A Power Source - Toshiba M400-S4033 User Manual

Connect a local printer (see
page
Connect an optional external disk drive (see
an optional external diskette drive" on page
Install PC Cards (see

Connecting to a power source

Your computer requires power to operate. Use the power
cord/cable and AC adaptor to connect the computer to a live
electrical outlet, or to charge the computer's battery.
73)
Never pull on a power cord/cable to remove a plug from a
socket. Always grasp the plug directly. Failure to follow this
instruction may damage the cord/cable, and/or result in a fire
or electric shock, possibly resulting in serious injury.
Always confirm that the power plug (and extension cable plug
if used) has been fully inserted into the socket, to ensure a
secure electrical connection. Failure to do so may result in a
fire or electric shock, possibly resulting in serious injury.
Be careful if you use a multiple connector. An overload on one
socket could cause a fire or electric shock, possibly resulting
in serious injury.
Always use the TOSHIBA AC adaptor that was provided with
your computer and the TOSHIBA Battery Charger (that may have
been provided with your computer), or use AC adaptors and
battery chargers specified by TOSHIBA to avoid any risk of fire
or other damage to the computer. Use of an incompatible AC
adaptor or Battery Charger could cause fire or damage to the
computer possibly resulting in serious injury. TOSHIBA
assumes no liability for any damage caused by use of an
incompatible adaptor or charger.
Getting Started
Connecting to a power source
"Connecting a printer" on
"Using PC Cards" on page
47
"Connecting
75)
151)