Technical Specifications - Johnson Controls S300 Series Hardware Installation

RDR8S and I32O16 Hardware Installation
24-10489-19 Rev. B
RDR8S
"Reader n Shunt"
SHUNT
Output is a relay.
"Reader n Strike"
STRIKE
Output is a relay.
T S
ECHNICAL PECIFICATIONS
The terminal is expected to operate at moderate temperature variation, non-
condensing humidity variation, moderate vibration, and possible dust
contamination.
Item
Input Power
Wiegand Reader
Interface
RS485 Device
Interface
General Purpose
Inputs
Relay Outputs
Red LED/
Green LED/
OUT1/OUT2
Outputs
Communications
Table 3: RDR8S and I32O16 Output Points
Specification
Nominal voltage +12 to +24VDC
48W
2-wire Wiegand* (up to 256 bits)
12VDC, 250mA (typical)
Red indicator
Green indicator
OSDP V1.0 compliant interface to select devices**
12VDC, 250mA (typical)
Resistive load
1A max. 0-24 VDC / VAC, 25VA max
100mA max. 0-24VDC.
These open collector outputs can be damaged with the use of
alternating current (AC) potentials as low as 1VAC. The LED
outputs can only be connected to direct current (DC) loads up
to 24VDC.
2 or 3-wire RS-485
27

Technical Specifications

I32O16
"Terminal n OUT3"
OUT3
It can be timed, set, reset,
fast flash, or slow flash.
Output is a relay.
"Terminal n OUT5"
OUT5
It can be timed, set, reset,
fast flash, or slow flash.
Output is a relay.