4.5.2
Baud rate setting (Pr.543)
Set the transmission speed. (Refer to the manual for the CC-Link master module for details of transmission speed.)
Pr.
543
Baud rate selection (CC-Link)
NOTE
• "L.ERR" LED flickers if the setting is changed. When power is switched on again or the RES signal is turned on, the setting
value is reflected and the LED turns off.
4.5.3
Frequency command with sign (Pr.541)
By frequency command with sign, start command (forward rotation/reverse rotation) can be inversed to operate.
Make selection of sign for the frequency command from RWw1.
Pr.
541
Frequency command sign selection
Name
Initial value
0
Name
Initial value
0
Setting range
Transmission speed
0
156 kbps
1
625 kbps
2
2.5 Mbps
3
5 Mbps
4
10 Mbps
Setting range
0, 1
INVERTER SETTING
4
47